Shenzhen Easy Green Environmental Protection Technology Co

High-pressure micro mist humidification, industrial humidification,
Dust treatment equipment, industrial dust treatment,
Dust treatment equipment, high-pressure dust removal equipment, dust removal system, dust removal sprayer
Dust removal: farm, mine, metalworking workshop, machinery workshop , textile workshop clothing car

Opening:
Shenzhen Yilu Technology Co., Ltd. independently developed and produced a spray dust removal atomization dust removal high-pressure micro-mist machine for industrial and mining enterprises. The principle is that after tap water enters the system , filtered by a micron-level precision water quality filter, and then sent into the equipment's built-in automatic water supply and storage tank. Use an ultra-high-pressure pump to pressurize the water to more than kilograms, and then atomize it through a high-pressure pipeline to a high-pressure nozzle. The diameter of the mist droplets is only 1. These tiny atomized particles can float in the air for a long time and are decomposed by the air. They have strong surface activity and adsorption capacity to effectively adsorb dust suspended in the air, especially inhalable particles with a diameter below microns, so that the dust settles under the action of gravity, thereby achieving dust suppression.
In view of the difficulty of sealing the transfer point of the dust material system, which causes flying dust during operation and seriously pollutes the on-site environment, Dongrong Company launched a spray dust removal atomization dust removal high-pressure micro-mist machine for industrial and mining enterprises to implement gravity dust reduction and Water mist suppresses dust by using nozzles with different shapes and atomization angles to spray above or around the dust source. Since the sprayed water mist particles are small and well atomized, they quickly condense with the dust into particles and are deposited to achieve elimination. dust and improve the environment.
Practice has proven that dust can be agglomerated and enlarged by being bonded by water or chemicals, but the smallest dust can only be reduced when the water droplets are very small (such as water mist) or chemicals (such as surfactants) are added. Only when the surface tension of water is small will it coalesce into clumps. If the diameter of the water mist particles is larger than that of the dust particles, then the dust will only follow the air flow around the water mist particles. There will be little or no contact between the water mist particles and the dust particles, so the dust suppression effect will not be achieved. If the sizes of water mist particles and dust particles are close to each other, the dust particles will collide and contact with the water mist particles as they move with the airflow and bond together. The smaller the water mist particles, the greater the possibility of coalescence. As the coalesced dust clusters become larger and heavier, they can easily fall. This is how the filtering effect of water mist on dust is formed. The spray dust suppression device has unimaginable dust suppression capabilities: the dust suppression efficiency in the dumper room, screening tower, and belt conveyor transfer tower all reaches above. The main objects of dust treatment are the following dust particles, especially the capture size In terms of respirable floating dust of about microns, it has advantages that other dust suppression equipment cannot match.
Shenzhen Yilu Technology Co., Ltd.'s spray dust removal atomization dust removal high-pressure micro-mist machine for industrial and mining enterprises has successfully filled the gaps in the technology, production, and application of such equipment in my country, improved the automation level and product quality of the environmental protection industry, and reduced dust It pollutes the atmosphere, improves the surrounding environment and the working environment of on-site workers, reduces the occurrence of occupational diseases, and creates extensive social and economic benefits.
The high-pressure micro-mist machine for spray dust removal and atomization dust removal in industrial and mining enterprises is widely used in closed or semi-closed spaces with fixed pollution sources in ports, docks, power plants, steel plants, mines, petrochemicals and other unorganized emission sites, such as rollover rooms. , screening tower, transfer tower, crusher, etc.

Introduction to spray dust reduction system
The main hazards of coal mine dust include coal dust explosion and miner's pneumoconiosis. The major catastrophic accidents caused by coal mine explosions are well known, but the casualties caused by pneumoconiosis caused by mine dust are ignored by most people. In fact, more than three times as many people die from pneumoconiosis as from mining accidents and other workplace accidents.
At present, there are tens of thousands of new cases of pneumoconiosis every year, and it is on the rise, causing direct economic losses of tens of billions of yuan every year. Mining accidents and occupational diseases have become a major social hazard in our country, causing problems for families and society. .
It is the unshirkable social responsibility of coal mine equipment production, research and development and supporting enterprises to develop system solutions and products that effectively control coal mine dust reduction.

Generation of coal mine dust:
In the coal mine production process, the proportion of floating dust produced in each production link is roughly:
? The dust produced by the coal mining face accounts for
? Proportion of dust production at the excavation working face
? Proportion of dust production at anchor blasting operation points
? Proportion of dust production at other operation points
As the degree of mechanization at each operation point increases, the amount of mineral dust generated also increases is increasing. High-pressure spray dust suppression is one of the effective measures to reduce dust concentration in coal mining working surfaces.
Introduction to high-pressure micro-mist dust suppression equipment:
High-pressure micro-mist dust suppression equipment is a new type of dust suppression system developed by our company based on the introduction of foreign equipment. The principle is to use a high-pressure pump to pressurize water to more than kilograms, and then atomize it through high-pressure pipelines to high-pressure nozzles to form flying raindrops, creating good and fresh air. The mist droplets quickly absorb impurity particles suspended in the air and increase in volume. Then it lands on the ground to achieve the dust reduction effect. In addition to being used for dust reduction in workshops and factories, the system also has multiple uses such as landscaping, cooling, humidification, and disinfection. Multi-purpose, economical use. The system has low construction cost, low operation and maintenance cost, is economical and practical, and can realize unmanned automatic control.

Introduction to spray dust reduction system:
The main hazards of coal mine dust include coal dust explosion and miner's pneumoconiosis. The major catastrophic accidents caused by coal mine explosions are well known, but the casualties caused by pneumoconiosis caused by mine dust are ignored by most people. In fact, more than three times as many people die from pneumoconiosis as from mining accidents and other workplace accidents.
At present, there are tens of thousands of new cases of pneumoconiosis every year, and it is on the rise, causing direct economic losses of tens of billions of yuan every year. Mining accidents and occupational diseases have become a major social hazard in our country, causing problems for families and society. .
It is the unshirkable social responsibility of coal mine equipment production, research and development and supporting enterprises to develop system solutions and products that effectively control coal mine dust reduction.

Equipment composition:
Pumping station unit: Using high-pressure water generated by a high-pressure ceramic plunger pump, the pressure sensor and frequency converter are used to self-regulate the pressure of the pumping station, which can be adapted to /~ / Stable adjustment between flow rates, and has a variety of protection functions.
Spray unit: The precision-machined copper or stainless steel micro-mist nozzle has the characteristics of fine spray, no wear and tear, and small pressure loss. Aperture: . . ., spray volume ~/(hour)
, control unit: According to the engineering needs, the system uses programmable control to adjust, display and control each status point of the system, and monitor all system functions to To avoid faults and display faults, when the control unit is connected to an external sensor or servo mechanism of an external controller, a fully automatic system can be formed.
. High-pressure shunt valve unit: The high-pressure shunt valve can realize the predetermined program of high-pressure water control and the predetermined spray unit multi-channel water supply or drainage according to the requirements.


Features of spray dust suppression equipment:
Fine mist: The spray nozzle of the spray dust suppression equipment can produce hundreds of millions of mist droplets per second. The diameter of the mist droplets is only ~, just like clouds in the mountains. , has an excellent effect on absorbing dust and impurities.
Energy saving: Atomizing kilograms of water only consumes electricity, which is one-tenth of that of centrifugal and other spray equipment.
Reliable: The main engine of the spray dust reduction system is an imported industrial plunger pump, which can operate continuously for hours and hours. The nozzle and water mist distributor have no power and vulnerable parts and will not be damaged in high dust environments.
Hygiene: The water in the spray dust suppression system is sealed and non-circulated, which will not cause the growth of bacteria.
Spray volume: The spray volume is large and can be freely combined. The output flow rate of the pump station of the spray dust suppression system ranges from /~/, which can be adjusted steplessly. The fog heads can be configured arbitrarily within the flow range, and the spray can be adjusted in any combination.
Wide application: In addition to dust reduction, it is also widely used in landscaping, humidification, odor removal, greenhouses, seedlings, livestock breeding, spraying, cooling and many other fields.

Features of spray dust reduction equipment:
Fine mist: The spray nozzle of the spray dust reduction equipment can produce hundreds of millions of mist droplets per second. The diameter of the mist droplets is only ~, just like clouds in the mountains, adsorbing dust and impurities The effect is excellent.
Energy saving: Atomizing kilograms of water only consumes electricity, which is one-tenth of that of centrifugal and other spray equipment.
Reliable: The main engine of the spray dust reduction system is an imported industrial plunger pump, which can operate continuously for hours and hours. The nozzle and water mist distributor have no power and vulnerable parts and will not be damaged in high dust environments.
Hygiene: The water in the spray dust suppression system is sealed and non-circulated, which will not cause the growth of bacteria.
Spray volume: The spray volume is large and can be freely combined. The output flow rate of the pump station of the spray dust suppression system ranges from /~/, which can be adjusted steplessly. The fog heads can be configured arbitrarily within the flow range, and the spray can be adjusted in any combination.
Wide application: In addition to dust reduction, it is also widely used in landscaping, humidification, odor removal, greenhouses, seedlings, livestock breeding, spraying, cooling and many other fields.